Tel: 620-345-2807

116 e Cole Street, Moundridge, KS 67107, USA

BG- 600 Bucket Grapple 

Remove debris caused by storms, tornadoes, and hurricanes
Use in scrap and recycling
Remove concrete and asphalt from work sites.
For skid loaders, track loaders, compact tractors, and other machines
Heavy duy construction throughout
High- carbon bolt- on reversible cutting edge with common bolt hole spacing

Specs

Weight 863 lbs (388 kg)
Width 72 in (1,829 mm)
Depth 40 in (1,016 mm)
Maximum closed height 29in (736 mm)
Maximum open height 43 in (1,092 mm)
Maximum opening gap 38 in (965 mm)
Closed clamping force @ 3,000 psi 2,872 lbs (1,303 kg)
Auger,Trencher, & Grapple
BG- 600 Bucket Grapple

BG- 600 Bucket Grapple 

Remove debris caused by storms, tornadoes, and hurricanes
Use in scrap and recycling
Remove concrete and asphalt from work sites.
For skid loaders, track loaders, compact tractors, and other machines
Heavy duy construction throughout
High- carbon bolt- on reversible cutting edge with common bolt hole spacing

Specs

Weight 863 lbs (388 kg)
Width 72 in (1,829 mm)
Depth 40 in (1,016 mm)
Maximum closed height 29in (736 mm)
Maximum open height 43 in (1,092 mm)
Maximum opening gap 38 in (965 mm)
Closed clamping force @ 3,000 psi 2,872 lbs (1,303 kg)
Auger,Trencher, & Grapple
BG- 600 Bucket Grapple

BG- 600 Bucket Grapple 

Premium hydraulic cylinders, hoses, and fittings
Secure and covered hydraulic hoses
Four sided protection of cylinder rods
Side moundted auxiliary connections
Ten-tine grapple base
Four point reinforcement
Fully enclosed back
Specs
Weight 675lbs (306kg)
Width of grapple 72in (1,829mm)
Depth of grapple 41in (1,041mm)
Maximum height of grapple (closed) 30in (762mm)
Maximum height of grapple (open) 41.75in (1,060mm)
Closed clamping force @ 3,000 psi 2,872 lbs (1,303kg)

G-72 Grapple 

The Lowe SK- Series of gear reduction auger drive units features a significant strength increase over the competition. This provides unbeatable dependability and value. We also include a full- length heavy- duty housing and the strongest drive hubs on the market.
SK Hydraulic Auger Drive Units
Model Description/Capacity
 SK150: Designed for augers up to 30- inch (762 mm) diameter and hydraulic flows of 10-20 Gpm
(38-76 Lpm). Comes standard with a 2- inch (51 mm) hex drive shaft and a 2 9/16- inch (65 mm)
round shaft is available.
 SK200: Extra power appropriate for light to moderate digging conditions, this unit operates best on
machines offering from 15-30 Gpm (57-114 Lpm) of hydraulic flow. Extremely well suited for
mid-sized to large skid steer loaders and other hydraulic machinery operating where high
performance is demanded. Comes standard with a 2- inch (51 mm) hex drive shaft and a 2 9/16- inch
(65mm) round shaft is available.
 SK225: Highly suitable for all moderate to moderately heavy diggingconditions, this unit delivers added torque from 15-30 Gpm (57-114 Lpm) hydraulic systems. A highly recommended unit for larger skid-steer loaders, high- flow auxiliary hydraulic systems, popular backhoe loaders and other similar machinery. Comes standard with a 2- inch (51 mm) hex drive shaft and a 2 9/16- inch (65mm) round shaft is available.
 SK250: A high-speed, high- flow auger drive compatible with a wide range of hydraulic pressures (2,000-4,200 PSI) and flows (15-42 GPM). This unit features a standard 2-inch (51 mm) hex drive shaft for use in light to moderately heavy digging conditions.
 SK450: Incredible power is on tap with this auger drive unit. This unit features a 2- 1/2 inch (63.5 mm) hex drives shaft for use in the toughest hole drilling conditions and is capable of operating on hydraulic system relief pressures up to 4,200 PSI and 20-42 GPM (76-156 Lpm). Because of the tremendous power of this unit, we recommend using our LX heavy- duty auger bits.

SK Hydraulic Auger Drive Units 

The Classic Series has the traditional trademarked lowe look while incorporating the latest in performance and durablity features. All of this at a lower price than the previous models. This is a design that will take the stresses of tough duty and thousands of pounds of twist force for years of dependable service. They are not limited to "lighter duty" applications.
Classic Hydraulic Auger Drive Units
Model Description/Capacity

 500XL:  Designed for hydraulic pump output of 5-15 Gpm (19-57 Lpm) and easily
uses auguers up to 15 inches (381 mm) diameter
 750 Classic: Designed for 7-20 gpm, it uses augers up to 18 inches in diameter
 1200 Classic: Performs best with 10-20 gpm. Typically uses augers of up to 24 inches in diameter
 1650 Classic: Works very well in harder to penetrate soil. Often used on larger skid steer
loaders and small backhoes. Will handle auger bits as large as 36 inches in certain
digging conditions. Should have 14-25 gpm.
 2175: Ideal for 16-25 gpm range. With a large- displacement hydraulic motor, this drive is
ideal for large skid-steer loaders, backhoe loaders, and larger mini- excavators. This
unit will handle auger bits up to 36 inch diameter in many conditions.

Classic Hydraulic Auger Drive Units 

XR- Series Trencher Attachments

Remove debris caused by storms, tornadoes, and hurricanes
Use in scrap and recycling
Remove concrete and asphalt from work sites.
For skid loaders, track loaders, compact tractors, and other machines
Heavy duy construction throughout
High- carbon bolt- on reversible cutting edge with common bolt hole spacing

Specs

Weight 863 lbs (388 kg)
Width 72 in (1,829 mm)
Depth 40 in (1,016 mm)
Maximum closed height 29in (736 mm)
Maximum open height 43 in (1,092 mm)
Maximum opening gap 38 in (965 mm)
Closed clamping force @ 3,000 psi 2,872 lbs (1,303 kg)
Auger,Trencher, & Grapple
BG- 600 Bucket Grapple

BG- 600 Bucket Grapple 

Remove debris caused by storms, tornadoes, and hurricanes
Use in scrap and recycling
Remove concrete and asphalt from work sites.
For skid loaders, track loaders, compact tractors, and other machines
Heavy duy construction throughout
High- carbon bolt- on reversible cutting edge with common bolt hole spacing

Specs

Weight 863 lbs (388 kg)
Width 72 in (1,829 mm)
Depth 40 in (1,016 mm)
Maximum closed height 29in (736 mm)
Maximum open height 43 in (1,092 mm)
Maximum opening gap 38 in (965 mm)
Closed clamping force @ 3,000 psi 2,872 lbs (1,303 kg)
Auger,Trencher, & Grapple
BG- 600 Bucket Grapple

Our XR-Series (XR-14 to XR-35) trenchers are the most advanced

trenching attachments made. They improve on all the great features of

the dependable X-Series by adding new Lowe hydraulic motors and a

reduction chain tensioning system. The new Lowe hydraulic motors

have a stronger motor shaft and mounting support and the chain

tension system allows you to precisely dial in the exact setting for even

longer life. They include a 50,000-lb. (22,680kg) digging chain, removable

spoil auger, self-aligning boom with grease-cylinder tensioning system,

sealed tapered roller bearings in the nose, new end boom roller,

manual side shift standard (hydraulic side shift optional), and a

3,300-psi (22,752kPa) to 4,200-psi (27,578kPa) continuous operating

pressure capability.
Features
New Lowe motor with stronger motor shaft and mounting support.
Reduction drive chain tensioning system for added durability.
Stronger, self-aligning boom design with improved grease cylinder tensioning system for increased component life.
New, more wear resistant end-boom roller reduces bearing load, increases digging chain life, and virtually eliminates lockup.
Stronger, more wear resistant drive shaft
Redesigned trencher housing improves visibility, trench starting, and digging capability.
Stronger, maintenance-free, tapered roller bearings in boom nose.
Easier field maintenance of service and parts.
Optional trench cleaner improves trench cleanout and is even more durable than previous models.
Optional hydraulic side-shift for even more convenience.
XR-Series Trenchers
Model 7 Trencher Attachment 
The LOWE® Model 7 hydraulic trencher is an economical and very solid basic trencher attachment. This unit adds versatility to smaller skid steer loaders in the 800- to 1,000-lb. (362.9-453.6kg) class. Included are a 34,000-lb. digging chain, removable spoil auger, a maintenance-free sealed bearing in the nose, and a 3,000-psi (20,684kPa) continuous operating pressure capability.